Harken AirBlock support/holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold a Harken AirBlock H2600 horizontally to keep it from dangling/banging
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I have a sailboat. The spinnaker sheets (big sail control lines) come back to the stern pulpit and through a H2600 AirBlock. This dangles and bangs. There is no obvious way to hold it in position, so I made this.
It is a loose fit in the shape of the hole, with 3 small “snap” bumps. It easily pushes through, but can be released as easily. When tied to something above it, it holds the block horizontal (fore/aft and port/starboard) as it would be in use, while still providing full movement as required.
This is 24/7 in the sunlight, so use an outdoor filament. I used ASA, PETG is probably good too. Black would look nicer! :)