Rev-A-Shelf Pull Out Kitchen Trash Can Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought the following pull out trashcan retainer. It works great except the trashcans are not held firmly in place so…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1001
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I bought the following pull out trashcan retainer. It works great except the trashcans are not held firmly in place so they move around when you open the cabinet.
Rev-A-Shelf - 53WC-1835SCDM-212 Pull-Out Waste Container with Soft-Close Slides
https://www.amazon.com/gp/product/B00VI795EQ
I designed this Thing which attaches to the side rails and holds the cans in place so they aren't moving around. I printed the brackets in PLA and used a 1/4" #6 screw with a washer to attach to the Rev-A-Shelf pull out rails. Four brackets are needed. No supports are needed for printing and you should print it in the orientation of the design file.
Category: Organization