Giant Ultimaker Robot for Vacuum Forming
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Thing is an Ultimaker Robot which I scaled up to 200 mm tall by 220 mm wide. I printed him in halves so that the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This Thing is an Ultimaker Robot which I scaled up to 200 mm tall by 220 mm wide. I printed him in halves so that the parts could be bucks for a vacuum forming machine. The photos show the robot halves together and then on the vacuum forming machine. This Ultimaker Robot Shell will be used for a balancing robot my 4H class is building. The hollow shell slides over the electronics.
Each half of the Ultimaker Robot takes about 16 hours to print with 10% infill. I used PLA which holds up fine under the vacuum forming process.
This Ultimaker Robot is not to scale for height. It is shorter than it should be and I have added fenders and cutouts for the balancing robot wheels.
Category: Robotics