1 / 7
Bosch Plunge Router 1617 Dust Shoe / Vacuum Port Adapter — zdjęcie 1
1 / 7

Bosch Plunge Router 1617 Dust Shoe / Vacuum Port Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dust shoe for the Bosch Plunge Router. Should fit most vacuum hoses, but .step file is included as well

Ocena
5 / 5
Polubienia
11
Pobrania
80
Wydruki
1
Wyświetlenia
326
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Made for the Bosch plunge base for the 1617 router.

Mk6 is a major rebuild. It allows it to print in a vertical orientation in order to add a lower extension to collect closer to the cutting area, as well as extending the wrapround shroud further. Some support at the top of the arch can help, but is not completely necessary.

Should fit most 1.5" / 40mm vacuum hoses, if not, the .step file is also included for easy remixing. Configuration variables are set, so bottom diameter should be equivalent to the inner diameter of the hose you're connecting, and the vac port top diameter set a couple millimeters smaller to taper the connection. Length can be adjusted as necessary as a configuration variable as well.

Required hardware to attach are two M4 x 12mm bolts, and M4 washers.