Bosch Plunge Router 1617 Dust Shoe / Vacuum Port Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust shoe for the Bosch Plunge Router. Should fit most vacuum hoses, but .step file is included as well
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 80
- Makes
- 1
- Views
- 322
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Made for the Bosch plunge base for the 1617 router.
Mk6 is a major rebuild. It allows it to print in a vertical orientation in order to add a lower extension to collect closer to the cutting area, as well as extending the wrapround shroud further. Some support at the top of the arch can help, but is not completely necessary.
Should fit most 1.5" / 40mm vacuum hoses, if not, the .step file is also included for easy remixing. Configuration variables are set, so bottom diameter should be equivalent to the inner diameter of the hose you're connecting, and the vac port top diameter set a couple millimeters smaller to taper the connection. Length can be adjusted as necessary as a configuration variable as well.
Required hardware to attach are two M4 x 12mm bolts, and M4 washers.