1 / 4
Headphone and Cable Holder under Table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A headphone and a cable holder that is designed to be mounted under table
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
This model is designed to be mounted under table and hold headphones, as well as a cable. Depending on the model you choose, it may hold a smaller sized cable, or a bigger sized cable. I mainly use the other side to hold cable from my VR headset.
This mount is attached under the table using 2x M4 screws.
Recommended Settings in Slicer Software:
- Precise Wall: True
- Walls printing order: Outer/Inner
- Sparse infill density: 15%
- Sparse infill pattern: Gyroid
This model will take approximately 0 hours 25m to print and will use approximately 6g of Filament
Thanks for installing/using it, or just coming by :)