1 / 4
Ultra-Lightweight Shelf (18 grams of Filament) NO SUPPORTS — zdjęcie 1
1 / 4

Ultra-Lightweight Shelf (18 grams of Filament) NO SUPPORTS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Super lightweight shelf. Prints in less than 3 hours.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Public Domain

Designed in Fusion 360 – No Supports Required
This shelf prints in approximately 2 hours and 30 minutes and requires no support structures. Installation is simple—just attach it to any smooth surface using double-sided tape; I recommend using nano tape for optimal grip. The shelf measures 150 mm in length and approximately 45 mm in width. Despite its compact size, it is designed to support a substantial amount of weight.

Tagi