Base & Spacer for Raspberry Pi 4 with MacArthur HAT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Case for Raspberry Pi 5 with MacArthur HAT. Take the top from the original model.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Taken from the original model:
Case to house the Raspberry Pi 4 + MacArthur HAT combination.
It snaps easily on place and can be released without tools.
For assembly use the 4 brass M2.5 16mm hex stand-offs included with the MacArthur HAT.
There is room to also house the two optional modules for power supply management and heading and heel data acquisition.
To allow access to all the connectors it has been necessary to divide it into three parts that are printed separately and mounted one on top of the other and secured with 4 M3 screws in the corners.
There are two types of brackets, one to secure the assembly to a flat surface and another to mount it on a DIN rail.
Please see the original model description for more.
https://www.printables.com/model/1168763-case-for-raspberry-pi-5-with-macarthur-hat
Many thanks to @nas_4865 for creating and sharing the original model.