1 / 3
Double DIN breaker box holder with built in rail - solar breaker box — zdjęcie 1
1 / 3

Double DIN breaker box holder with built in rail - solar breaker box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small enclosure with DIN rail to hold a pair of single electrical breakers or one double breaker.

Ocena
3 / 5
Polubienia
31
Pobrania
270
Wydruki
1
Wyświetlenia
823
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a small enclosure to hold a pair of single DIN rail mounted breakers or one double breaker.  It will safely cover all the electrical connections and firmly snap together. In fact, it is difficult to get the cover off once it is installed, but that is the idea! The box can be mounted on a wall or cabinet with two screws.  The breakers slide into the box on the DIN rail.  The connections are made through the holes in the mounted box and then the lid snaps in place. 

It works really well on the solar panel in my camper.

NOTE! The breakers must be no longer than 89mm to fit in the box.  The width of a single breaker (about 18mm) seems to be pretty consistent. This is the dimension of most of the breakers I have seen, however I had a Lightning protection module that would not fit as it was about 94mm in length, so measure before you print!

 

Tagi