Double DIN breaker box holder with built in rail - solar breaker box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small enclosure with DIN rail to hold a pair of single electrical breakers or one double breaker.
- Rating
- 3 / 5
- Likes
- 31
- Downloads
- 270
- Makes
- 1
- Views
- 823
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a small enclosure to hold a pair of single DIN rail mounted breakers or one double breaker. It will safely cover all the electrical connections and firmly snap together. In fact, it is difficult to get the cover off once it is installed, but that is the idea! The box can be mounted on a wall or cabinet with two screws. The breakers slide into the box on the DIN rail. The connections are made through the holes in the mounted box and then the lid snaps in place.
It works really well on the solar panel in my camper.
NOTE! The breakers must be no longer than 89mm to fit in the box. The width of a single breaker (about 18mm) seems to be pretty consistent. This is the dimension of most of the breakers I have seen, however I had a Lightning protection module that would not fit as it was about 94mm in length, so measure before you print!