1 / 6
Outlet Cover Safety Plug (Easy Removal) No-supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PRINT PRONGS ON BED. This insures strength as a lone layer line can snap easily and leave a stuck prong in your outlet!
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 175
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (11)Powiązane
If your outlets are close together you can print the “Small_Outlet_Plug” version.
PRINT THE PRONGS ON BED.
This insures strength as a lone layer line can snap easily and leave a stuck prong in your outlet!
Layer Height & Infill: Recommend 0.20 mm layers, 15 – 20 % infill
Material: PLA or PETG. PETG is slightly better for its flexibility and heat resistance.
− No handle because: speeds up printing, no scratches, compact design, and the finger holes are suffice for removal.