Voron V0.2 Motor Plate PUG Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A motor plate for the Voron V0.2 with a PUG mount
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Description
A motor plate for the Voron V0.2 with a PUG mount. This model was based off of the T0/V0 Rear Separator - PG7 Mod by EddieSha. This mod also adds an extra cable pass-thru hole to the front of the plate to pass wires through for filter fans, servos, chamber temp sensors, etc.
The column in the back of the plate was from EddieSha's design and can be used to pass the PTFE tube through or for a USB camera cable. The top of that tower has a notch to secure the tube or cable with a zip tie. Personally, I used it for a USB camera, and pass the PTFE tube through by using the URBI mod by Maple Leaf Makers.
BOM
| Item | Qty |
| M3x5x4 Heatset Insert | 2 |
| M3x8 SHCS | 2 |
| Nylon Zip Tie (Optional - For PTFE or USB Camera Cable) | 1 |