Safety Gate Adapter - 1in Square Bannister
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister.
Adjusted the hole shapes to print more round on a 3D printer (model holes designed as tear drop shapes as opposed to circles)
BOM:
- 2x M4x16 screws
- 2x M4x20 screws
- 4x M4 nuts
- 1x M5 nut
- 1x M5 washer
- 1x M5x12 screw
Notes:
I used an M5 Tap to cut threads for the M5 screw on the front piece. A smooth bore M5 drill would work as well. I did not make that hole tear shaped for better printing because I intended to tap it anyway.
The 3mf file has the files laid out in the optimal print orientation.
I personally used Prusament PC-CF for maximum strength, since the part is potentially load-bearing.