1 / 2
Alarm Clock Base Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
My alarm clock was very tippy as its base is very narrow. I designed these clamp-on feet to expand the base and made it much more stable.
Dual compliant mechanisms to clamp any rectangular object about 30.4mm wide. Base of print will simultaneously warp into a shallow arc to place the contact points at the two extremities.
I would recommend adding some sort of grip bubbles at both ends as printed files are not very grippy.
Printed at 0.2mm layer height. Thin part so no sparse infill; all solid walls. Fuzzy skin 0.2/0.1 except on the bottom and clamp contact points.