Alarm Clock Base Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom feet for alarm clock to make it much more stable and resistant to tipping over
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
My alarm clock was very tippy as its base is very narrow. I designed these clamp-on feet to expand the base and made it much more stable.
Dual compliant mechanisms to clamp any rectangular object about 30.4mm wide. Base of print will simultaneously warp into a shallow arc to place the contact points at the two extremities.
I would recommend adding some sort of grip bubbles at both ends as printed files are not very grippy.
Printed at 0.2mm layer height. Thin part so no sparse infill; all solid walls. Fuzzy skin 0.2/0.1 except on the bottom and clamp contact points.