350z magsafe phone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
phone holder to fit into the box on the dash and keep you phone from falling when accelerating
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This phone holder is designed to fit securely into the storage box on the dash and prevent your phone from sliding when accelerating.
It's made to suit an iPhone 16 Pro with a standard MagSafe case. It should also fit any Pro version iPhone, though minor adjustments may be needed for Max models (not yet tested).
To route the charging cable cleanly, drill a 13mm hole through the side of the interior box. This allows you to feed the cable under the dash and plug it into the passenger-side cigarette lighter.
For mounting, I used a small dab of silicone between the MagSafe charger and the 3D print, and another between the back of the print and the back of the storage box. If you keep the silicone minimal, the holder can be pried out easily when needed.