Simple Cable Tie - Over Engineered IKEA Alforsit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did not like the IKEA Alforsit. So I made a better one.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought the Alforsit. It was too small. I made it bigger. Additionally, I made it compatible with 3D printers.
Instructions: Stick the small part into the curly part. Just like a puzzle. A small amount of adhesive is advised. I did not use any adhesive; it worked without it.
Parts are friction fit. You can use a cylinder to push the part in from the main part. I have used a ballpoint pen with its last piece removed.
The internal diameter is 20mm when closed. If you want other sizes, please contact me. I will provide them when asked. I will also add other sizes if I make them.
My honest thoughts are: IKEA made a great product, with several issues that made it unuseable. I am trying to fix these. The Original attribution and idea belong to them.
IKEA, don't sue me. Please hire me?