1 / 4
Super Mario Piggy Bank (Bigger Version 6.0" x 6.0" x 6.0") — zdjęcie 1
1 / 4

Super Mario Piggy Bank (Bigger Version 6.0" x 6.0" x 6.0")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the a Super Mario Piggy Bank Box. This model is more efficient w/ print time & filament consumption.

Ocena
5 / 5
Polubienia
12
Pobrania
78
Wydruki
3
Wyświetlenia
246
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Hello Everyone! Happy Printing!

This is a remix of a Super Mario Piggy Bank that I found on Printables.com. 

I have linked the original model that I sourced. 

This new model was adjusted to be more efficient with print time and filament consumption. 

The original model had an overall size of 3.0" x 3.0" x 3.0" with .125" thick walls. 

This new adjusted model is bigger with an overall size of 6.0" x 6.0" x 6.0" with .063" thick walls. 

All parts do not need support and can be printed with 2 perimeters and 15% gyroid infill.

You will need to print the following:

1X Super_Mario_Piggy_Bank_Lid

1X Super_Mario_Piggy_Bank_Box

4X Super_Mario_Piggy_Bank_Accents

 

To assembly the prints you will only need super glue and 6mm x 2mm magnets (QTY 8). 

Other than that, happy printing and I hope you all enjoy this adjusted model. 

Let me know if you have any questions. Please like, rate, and share this model. Thank you!!

Tagi