Liczymy pasujące modele…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, Green, Yellow, Blue, and Red last. 6 colors/ 5 changes total. You can use just 4 colors and stop and it will still look good, just all the flowers will be the same color. 2 color version →…
Print with black, and add a color change around 1.30mm to switch to red. Use 0.10 or 0.20mm layers. The model can be safely downsized for a Prusa Mini.
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
While shooting extended time-lapses with my phone, I often need to connect a power bank. To address this, I've designed a customizable, parametric mount that easily snaps onto any vertical rod or shaft. This model is specifically…
I believe the original was done by flowalistic. I modified so that they all use the same cap on the bottom.
Banksy key chain dimensions 50x50 mm Printing: Layer 0.2mm 1 layer - white 11 layer - replace filament - black 13 layer - replace filament - white 15 layer - replace filament - red
Bonjour Je vous propose ma version d'un pochoir pour réaliser une copie du graffiti de Bansky ; Girl with ballon. Parti d'une image, modifié avec paint. 3D réalisé a l'aide d'un site de lithophanie et de Prusa Slicer. Ammusez vous bien ;)…
Banksy frame style Explore our hexagonal frame, ideal for hanging on a wall or standing on a piece of furniture with its stand. This decoration is a representation of Banksy's work “balloon girl”. The frame is printed with the wall…
George Washington is a series of outdoor bronze busts created in 1975 depicting George Washington by Avard Fairbanks.
Gauge pod based of a 3D scan of the factory vent for the Chevy Colorado. PLA wont hold up, PETG, ABS, etc should be fine. UPDATE: Slightly thickened to prevent warping.
Size= 150mm x 150mm x 3mm printed with a 0.2mm later height, each colour is 1mm thick. starting with white then black followed by red. I done a manual colour change, Changing every 1mm. Uploaded file with black string from balloon, i had…
My daughter wanted to spray-paint a couple of Halloween sweets collecting bags using stencils, and since we had visited a Banksy exhibition some weeks before, I also wanted to make a Banksy stencil, which she then used, too :) I used a…
DESTROY RACISM BE LIKE A PANDA HE'S BLACK HE'S WHITE HE'S ASIAN Size : 180mm 185 mm 2mm Print instructions Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.2mm tested Use External perimeters first to improve engravings precision.…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament before the details - layer. then start…
Here is the model for Mr Banks Bear. Mr Banks is a good Friend of Barry, and want to help you look after your money. Just like his friend he seems to just want to be your friend too, do you have space for Mr Banks? maybe he can keep Barry…
This is a model of a brand new statue attributed to the street artist Banksy that showed up in London overnight (don't ask me how). It's a statue of a man with his face obscured by a flag walking off a ledge. Not as good as the original,…
Start with White, then go Black, then Yellow last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Rats invasion Size : 186mm 128mm 2mm Print instructions Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.2mm tested Use External Perimeters first to improve engravings precision.
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Quadro rappresentante una delle opere più note di Banksy. NO raft NO brim Pla layer 0.15 riempimento 15%
These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Keychain with the famous acronym P4L from the Outer Banks series Printer: Ender 3 V2 Layer: 0,16mm Filament: Triwee PLA Time: 55min Llavero con el famoso acrónimo P4L de la serie Outer Banks Impresora: Ender 3 V2 Capa: 0,16mm Filamento:…
Start with White, then go Black, then Yellow last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
This is a trimmed-down version of the Steam Velcro Strap Brace for Power Banks modified by making it for the Killswitch case by Dbrand. If you own a Killswitch case you no longer need to use deckmate accessories, just attach the item you…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
A Clamshell vent cover for Grand Banks boats. Printed in PETG to better resist any impacts and heat it may experience.
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Blue, then Red last. 4 colors/ 3 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Banksy VANDALISED PHONE BOX telephone box and pickaxe Executed in 2005. This work was installed in Soho Square, London 2005 and later recovered from Westminster Environmental Services. On 14 Feb 2008 it was auctioned in New York for…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Just some dino nuggies I made for the piggy bank contest. These are made to demonstrate the Time Machine mode that lets your printer emulate a printer from the Mesozoic Era (Fuzzy Skin mode). But really, the fuzzy skin texture does a…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. No supports needed for most machines, even for that large bridge. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Quick Guide to…
Couldnt find a print that i liked. So I made this from an image I found on Bukowskis auction house. Its supposed to be printed in two colors, so the first color layer is 1 mm thick. That should be 5 layers at 0,2 layer height. Then the…
Here's another one of my folding cellphone designs with Banksky's Balloon Girl design. I have a few other cellphone stand designs here: https://www.printables.com/social/224841-joe/collections/479598 There are added features on this,…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Quick Guide to changing filament~ Have some paper to push away extruded filament.…
Resin or Filament. Needs supports
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Blue, then Black, then Red last. 4 colors/ 3 changes total. ~~I chose this order because I think it looks a little better at the end. Gives the queen more height vs the background. Normally I want the colors on…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
A Steam DeckMate compatible print to strap devices to such as power banks, USB-C Hubs, or NVME drives) as an alternative to the universal puck. Use Velcro cable ties for a non-permanent method of attaching devices; I suggest buying a bulk…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with Black, then go White. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Illustration Pogue Life de la série Outer Banks
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
A clamshell vent cover for Grand Banks boats. Printed in PETG to better resist any impacts and heat it may experience.
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
This 3D model is an intricately detailed representation of Banksy's iconic 'Girl with Balloon' artwork. Crafted with meticulous attention to detail, this digital rendition captures the essence of the original piece, portraying a young…
🇫🇷 Description Cette sculpture est une reproduction de l’œuvre attribuée à Banksy, apparue à Londres fin avril 2026 à Waterloo Place, en plein cœur du quartier historique de Westminster. Installée discrètement durant la nuit du 29 avril,…
I hope you like this model. I printed it with a not very gold fillament, although it would look better with a real gold looking fillament. I appreciate your feedback and hope you enjoy it! Layer height: 0.1 Infill density: 20% No suports…
Fresh Prince of Bel-Air - Hilary Banks (Karyn Parsons) - 1990-1996 3D printable model.
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Fresh Prince of Bel-Air - Carlton Banks (Alfonso Ribeiro) - 1990-1996 3D printable model.
Use PETG for more durability. PLA for better detail. Model snaps together. But you can glue it for something more permanent.
3D printed version of the framed “painting” of a Girl with a balloon by Banksy. The painting can be moved into two positions - the whole painting and half shredded as in the auction of this work. The Lock prevents to the “painting” fall…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
The WC door hanger is an original decorative item that adds character to any room. Inspired by the unique style of the legendary artist Banksy, it combines humor, provocation, and street art. Made from durable materials, it is not only…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Esun Black Transmission Distance: 0.3 PLA+ Esun Bone White Transmission Distance: 5 PLA+ Esun White Transmission Distance: 5 Swap…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
Fresh Prince of Bel-Air - Ashley Banks (Tatyana Ali) - 1990-1996 3D printable model.
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Fresh Prince of Bel-Air - Philip Banks (James Avery) - 1990-1996 3D printable model.
This is meant for 2 color printing. The base has 0,4 mm and then the drawing follows with 0,4 mm on top. Slice it with a layer height of 0,2 and insert a Change filament before the 3rd layer and thus you can print it black on white or…
shirt collar stay for Jeff Banks shirts (which seems to be narrower than standard)
Start with White, then Grey, last go Black. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
2 versions of batman helm piggy banks. 1 bank has base. the other does not have a base. both have a plug for hole in bottom. Category: Containers
I combined the parts for the girl and for the ballon for multicolor printing with an AMS. You will still need the Frame and the Base of the original model by Xav83.
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
My wife is a Yoga Teacher and she wanted a piggy bank for her students so I created this model. Update Nov. 18 2023 - I got a few requests for a better lock mechanism so I added a magnet version. Just throw the cover to the base and it…
Fresh Prince of Bel-Air - Vivian Banks (Janet Hubert) - 1990-1996 3D printable model.
Saisen Shrine Piggy Banks are used to store savings, and the idea behind this design came from Japanese citizens visiting temples to make wishes. The idea behind this technique is that in order for a Japanese person to make a wish, they…
I wanted to see how well I could do a three-color print, so I made a copy of the Banksy Love Rat and turned it into a refrigerator magnet. Requires two 6x2mm round magnets.
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
V3 bottom and cap with special tool to open the box. The v2 is out for the bottom, top, cap hole, hexagons, pentagons for increasing print quality and clip v2 to facilitate assembly. Another piggy banks home-made and customizable. You can…
I made two versions. The difference are the horns. Just decide what looks better for you and print.
Neck pendant inspired by Banksy's girl with a balloon.
Turn your Atmos pump into a unique work of art! Printing instructions balloon.stl Nozzle size: 0.2 Layer height: 0.2 Perimeters: 2 Color change: white → black on layer 5, black → red on layer 10 Supports: printed with supports because…
Customizable boxes in 3 sizes. New: Swiss style for front sides here ! or in remix section. When it's full, break the top to unclipping the box and reprint it. How to customize: Open in prusa slicer the 3mf files. in the right list…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 126.99x170mm in size You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 1.2mm…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
