Spherical port for filament dryers - REWORKED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reworked of Spherical port for filament dryers
- Ocena
- 3 / 5
- Polubienia
- 17
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I completely remodeled this part. I made it so it would accommodate the 10mm pneumatic fitting without the need to drill. Also when i printed the original one the insert came out and the nut was loose so re-worked tolerances
It needs a very large hole 20mm so not sure i would drill a commercial dryer but if works well for the DIY version:
https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
I had no trouble drilling with the largest bit i had then using a deburring tool to make the hole larger in the plastic containers. would not recommend for commercial dryers
Printed in Polymaker CoPE 0.12mm layer height
