Spherical port for filament dryers - REWORKED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reworked of Spherical port for filament dryers
- Rating
- 3 / 5
- Likes
- 17
- Downloads
- 86
- Makes
- 2
- Views
- 458
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I completely remodeled this part. I made it so it would accommodate the 10mm pneumatic fitting without the need to drill. Also when i printed the original one the insert came out and the nut was loose so re-worked tolerances
It needs a very large hole 20mm so not sure i would drill a commercial dryer but if works well for the DIY version:
https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
I had no trouble drilling with the largest bit i had then using a deburring tool to make the hole larger in the plastic containers. would not recommend for commercial dryers
Printed in Polymaker CoPE 0.12mm layer height
