Portable Air Conditioner - Window Dual Hose Exhaust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Window exhaust duct for a portable air conditioner with two 150mm hose connections.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 3379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We are not allowed to install a split air conditioner in our apartment, so we have to use portable air conditioners that push hot air out through a hose. However, these units create negative air pressure and suck hot air back in. To mitigate this, I installed a second hose on the AC unit, but now I need a way to pass both hoses through the window without making a big hole in the window seal.
For that, I designed this window exhaust to improve the efficiency and cooling performance of portable air conditioners. With this model, you can run the hot and cold sides of the air conditioner through the window, while leaving the window more closed than if you ran the hose directly outside. The window can be sealed with these fabric and zipper window seals, and the model has a zipper channel that also ensures a better seal. The hoses are connected magnetically, which allows a quick release if needed. The hot air is directed straight to the edge of the window, further away from the cool side, allowing better separation of the hot and cold sides and improving efficiency.
The model is split into multiple parts and sub-parts and can be printed in a Prusa Core One.
I've included the link to the Onshape project as well as the STEP files for anybody that wants to adjust anything to fit their application.
Features:
- Two 150mm hose connectors.
- Magnetically attached hoses.
- Magnetic part connectors.
- Split into parts for easy printing and assembly.
Materials:
- ~3kg of ASA
- 52 x 8x2mm magnets
- Super glue or aluminum tape to connect parts
Print settings:
- Material: ABS | ASA for UV resistance
- 15% infill
- 5mm brim
Links:
- Onshape design