1 / 3
Concept2 PM5 USB Drive Dock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add up to 8 USB thumb drive docks for storing your USB drives when not in use.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 1272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
I printed in Prusament Jet Black PETG and in two parts.
The .3mf includes:
- Two Scales (if you need another scale, please let me know).
- 100.0% accurate dimensions using calipers on the original battery cover
- 100.8% (XY only except on USB docks)
- My MK3S+ is dialed in (usually good for ~0.10 mm tolerance), but I still had to make these adjustments.
and
- Two Configurations
- Solid w/ supports enabled
- Three separate objects
- Cover and Docks
- Rim You may want to cut and print a few mm of one side of each rim part to determine which version you need for your printer
- Screw Guide (this part is unnecessary, but was on the original batter compartment cover, so I included it)
For either configuration, decide how many USB docks you want, then select and delete the remaining USB parts. Also, the dock in keypad position 8 would probably be blocked by the battery compartment screw. You can see I only printed 5 on mine.