1 / 3
Concept2 PM5 USB Drive Dock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add up to 8 USB thumb drive docks for storing your USB drives when not in use.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 1,272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed in Prusament Jet Black PETG and in two parts.
The .3mf includes:
- Two Scales (if you need another scale, please let me know).
- 100.0% accurate dimensions using calipers on the original battery cover
- 100.8% (XY only except on USB docks)
- My MK3S+ is dialed in (usually good for ~0.10 mm tolerance), but I still had to make these adjustments.
and
- Two Configurations
- Solid w/ supports enabled
- Three separate objects
- Cover and Docks
- Rim You may want to cut and print a few mm of one side of each rim part to determine which version you need for your printer
- Screw Guide (this part is unnecessary, but was on the original batter compartment cover, so I included it)
For either configuration, decide how many USB docks you want, then select and delete the remaining USB parts. Also, the dock in keypad position 8 would probably be blocked by the battery compartment screw. You can see I only printed 5 on mine.