versatile weed and tobaco tray / Vielseitige Bauhilfe Tabak und Gras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a closable weed tray with magnets / Einfache Bauhilfe für Weed und Tabak
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The box can be used as a support tray to work with weed or as a transport box to take it with you.
Measurements of the closed tray:
- height: 4cm (each box-half has a height of 2cm)
- width: 12cm
- length: 21cm
Measurements of the bulges:
- round bulge: 6,5cm in diameter
- bigger rectangle on the upper right corner: width 4cm, length 12cm
- smaller rectangle on the right (for the slider): width 4cm, length 5cm
- oval hole at the bottom: width 2cm, length 15cm
- all bulges have a depth of 1cm
- the bulge in the closing lid has also a depth of 1cm
slider (optional):
- length: 5cm
- width: 4cm
- height: 1,9cm
all magnets used for the whole tray:
- 4 x Magnet (8mm * 3mm)
- 12 x Magnet (3mm * 2mm)
For construction just press the magnets in the according holes. I designed it with enough tolerance to fit in nicely if you used the correct magnet sizes.
INFO: You have to correctly orientate the magnets to each other to ensure they are sticking together
For smoother print finishes i suggest following settings:
- use a brim
- use 0.08mm layer height
------------------------------------------------------------------------------------
Die Box kann sowohl als Bauhilfe, als auch als Transportbox genutzt werden.
Die Außenmaße der geschlossenen Box:
- Höhe: 4cm (jede Boxhälfte ist 2cm hoch)
- Breite: 12cm
- Länge: 21cm
Die Maße der Ausbuchtungen sind wie folgt:
- Runde Öffnung: 6,5cm Durchmesser
- Breiteres Rechteck oben: Breite 4cm, Länge 12cm
- kleines Rechteck rechts (für den Schieber): Breite 4cm, Länge 5cm
- Ovale Öffnung unten: Breite 2cm, Länge 15cm
- alle Ausbuchtungen haben eine Tiefe von 1cm
- Die Ausbuchtung des Deckels ist ebenfalls 1cm tief
Der Schieber (optional):
- 5cm lang
- 4cm breit
- 1,9cm hoch
Die benötigten Magneten für einen Tray:
- 4 x Magnet (8mm * 3mm)
- 12 x Magnet (3mm * 2mm)
Zum Aufbau einfach die Magneten in die passenden Öffnungen drücken. Die Löcher sind mit etwas Toleranz konstruiert, sodass es passen sollte.
INFO: Man muss die Magneten korrekt zueinander ausrichten, damit sie sich anziehen und nicht abstoßen.
Für ein besserers Druckergebnis empfehle ich:
- einen Brim zu benutzen
- 0.08mm layer height zu nutzen