1 / 5
Gear Up (Corsair Titan 360 AIO Cap)Easy Assembly and Moving Gears
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assembles in only 4 parts. No glue, screws or tape. Clips together.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Make your pc 100x better with a mechanical touch!
All parts should be oriented face down.

Disclaimer:
You need a well tuned printer and dry filament, other than that no supports or brim.
Any filament works, except obviously tpu.
Assembly:
After printing you'll have these parts:

Loosen the gears and push in the transmission gear:

Insert add the second layer on the cap (note the orientation):

Add the first layer:

Done!