Remix: Xbox Controller Holder with Pushfit Mounts for Multiboard (Based on Sof)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Controller Holder from Sof, modified to work with Multiboards Moderate Weight Bearing Snaps.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 70
- Wydruki
- 3
- Wyświetlenia
- 271
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the Xbox Controller Holder by Sof, modified to work seamlessly with the Multiboard system using Moderate Weight Bearing Snaps.
I integrated the official Multiboard pushfit adapters directly into the model and adjusted their spacing from 50 mm to 25 mm for a more compact and practical fit. The adapters are slightly rotated, so the entire model prints flat on the bed – no supports needed.
It’s a clean and efficient solution for mounting your Xbox controller to a Multiboard wall system, with easy snap-on/snap-off functionality. Perfect for organized, modular setups in your gaming or workspace.
Features:
Compatible with Moderate Weight Bearing Snaps from Multiboard
Integrated the original Multiboard pushfit mounts.
Reduced to 25 mm spacing for tighter layouts
No supports required – prints flat (also as the model from Sof)
15% gyroid infill used (FDM, 0.2 mm recommended)
Important:
Moderate Weight Bearing Snaps not included – available via the Multiboard system
Ensure proper printer calibration for accurate snap fit
Let me know if you have any feedback or questions – happy printing!