1 / 3
Deltarune Tenna Cosplay Pin and Buckle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Deltarune's Tenna's TV pin and belt buckle.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 383
- Wydruki
- 0
- Wyświetlenia
- 1457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (38)Powiązane
These were thrown together in a very short time period to create a cosplay for a (at that time) 3 day old character, Tenna. The cosplay was a hit at Phoenix Fan Fusion 2025. Included are the STEP and Fusion files if you want to modify.
The pin is attached with magnets which measure about 9.5mm x 2mm high.
The clip was attached to the belt buckle using heat set threaded inserts, but I'm sure a bit of good glue could do the same.
The edges around the “TV” and buckle perimeter were touched with a red sharpie to add a little contrast to the graphics.