Magnetic Card Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this card case for my wife for a set of tarot cards. The inside dimensions for the box are 72mm x 122mm x 26mm.
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this card case for my wife for a set of tarot cards. The inside dimensions for the box are 72mm x 122mm x 26mm. There are 6 embedded 5mm cube magnets for the case and for the lid. The pause layers are listed below in the print settings. You can download my magnetic polarity bar to help keep your magnets organized https://www.thingiverse.com/thing:3262111
Print instructions
Category: Organization Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: .20
Infill: 15
Notes:
Pause print for lid at layer 5.6 to add 5mm cube magnets.
Pause print for case at 31.8 to add 5mm cube magnets
You can use my magnetic polarity bar to help keep your magnets organized https://www.thingiverse.com/thing:3262111