Sabrent 252W AX-8PTC Charger Vertical Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical stand for the Sabrent 252W USB PD Charger (model AX-8PTC)
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 266
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a vertical desk stand for the Sabrent 252W USB PD charger (model AX-8PTC), a product recently popularized by Jeff Geerling and others for its great feature set.
The charger has a IEC60320 C8 socket at the bottom. The stand is meant to be used with a 90° plug extension for the corresponding IEC60320 C7 plug, as shown in the attached photos.
The device vents heat out “top” (grille as pictured), making it hopefully relatively easy on material. I used Prusament Galaxy Black PLA at 0.2mm layer height with a 0.4mm nozzle, with three perimeters and 10% gyroid infill - but just about any settings should do.
This model is, of course, extremely easy to print without supports in final-use orientation.