Sabrent 252W AX-8PTC Charger Vertical Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical stand for the Sabrent 252W USB PD Charger (model AX-8PTC)
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 64
- Makes
- 2
- Views
- 266
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a vertical desk stand for the Sabrent 252W USB PD charger (model AX-8PTC), a product recently popularized by Jeff Geerling and others for its great feature set.
The charger has a IEC60320 C8 socket at the bottom. The stand is meant to be used with a 90° plug extension for the corresponding IEC60320 C7 plug, as shown in the attached photos.
The device vents heat out “top” (grille as pictured), making it hopefully relatively easy on material. I used Prusament Galaxy Black PLA at 0.2mm layer height with a 0.4mm nozzle, with three perimeters and 10% gyroid infill - but just about any settings should do.
This model is, of course, extremely easy to print without supports in final-use orientation.