Counting matching models…
Made hooks wider and deeper for better retention. MOved mounting tabs inboard and resized mounting holes for M3 screws. Installed with 4040 M3 T-Nut by Olafelch - https://www.printables.com/model/217606-4040-m3-t-nut. Printed with organic…
Mounting bracket for Sabrent 10 port USB hub. Mounts with a screw at each end. This is not and was not intended to be rigid enough for you to yank cables out of the hub, just sufficient to hold it vertically on my sim rig. Printed in…
I made this model for my Sabrent. The goal being to manage and protect all my cables easily with a clean finish. It is made for the inner right side of your aluminium profile rig. If you need it for the left side, mirroring along Y axis…
This is a remix of Kryp's 2.5 Inch hard drive enclosure designed to work with this Sabrent SATA to USB 3.0 adapter . Category: Computer
This mount is designed to grip the Sabrent 4-port switched USB3.0 hub available from Amazon . https://www.amazon.com/Sabrent-4-Port-Individual-Switches-HB-UM43/dp/B00JX1ZS5O The hub snaps into place with two fins paired on the left and…
Enables you to mount the hub onto a wall/table etc. I designed this in Tinkercad, here is the link to the design if you want to make any changes: https://www.tinkercad.com/things/0ayiMZ6S4O0-sabrent-usb-hub-holder
A protective case for the sabrent m.2 ssd case with a compartment to hold the cable. Needs 2 6*3mm magnets for the lid. If you have any further questions or need a special file format to adjust the case to your likings feel free to dm me!…
Supporto per un Hub Usb Sabrent da 10 porte. Stampare con supporti.
I purchased a Sabrent USB hub from Amazon and wanted my USB ports easily accessible. This uses 4 small screws to hold it to a desk or anywhere you don't mind drilling a few holes. I designed it with a cutout on the bottom to access the…
Mountingbrackets for mounting Sabrent 4-Port USB-Hubs to aluminiumprofiles (Simrig etc.) Also he power supply can be used. Hole is for M8-screws.
Sabrent HB-BUP7 Mount Used to hold USB hub to 40mm aluminum extrusion using two M8 socket head cap screws.
After ripping all of my Doctor Who DVDs to an external hard drive (for faster, easier access), I thought it'd only be appropriate if the hard drive was in a Doctor Who TARDIS enclosure. I designed this to be used specifically with a…
This is a vertical desk stand for the Sabrent 252W USB PD charger (model AX-8PTC), a product recently popularized by Jeff Geerling and others for its great feature set. The charger has a IEC60320 C8 socket at the bottom. The stand is…
Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Creality PLA
There are a couple of bridges in this design I couldn't think of an easy way to avoid. I've printed the model twice and both time the bridges came out well enough without any special tweaking with plain PLA, and I'm definitely not a…
Under table mount for portable drive, specifically for a Sabrent enclosure. One end is open to allow for drive removal without removing the mount. =LJ= Print instructions Category: Computer Print Settings Printer Brand: Creality Printer:…
UPDATE: I've added the step files to the files section for this. It's not perfect, and I don't think I'll work on it any longer, but someone else is welcome to tweak and improve the design if they wish. The clamp design, specifically the…
The 16-port USB hub is a godsend but I hated that it was just flat on my desk, since it's so huge. So this angles it at about 40 degrees to fit under my vertically mounted monitor. Excuse the dirty desk! Also has provisions for little…
I made this edit quite a while ago and never got around to uploading it, I recently stumbled across the edit again, so here it is! Fits SABRENT 2.5 Inch SATA to USB 3.0 Tool Free External Hard Drive Enclosure [Optimized for SSD, Support…
Two part case for the Sabrent USB 3.0 to SSD / 2.5-Inch SATA Hard Drive Adapter. https://smile.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=cm_cr_arp_d_product_top?ie=UTF8 Category: Office
Fully enclosed case for the Sabrent 4-port USB Hub. Glue on the top and then slide in the hub through the side.
Gridfinity 4x2 holder for sabrent 10-port USB-Hub https://www.amazon.nl/dp/B0797NZFYP?ref=ppx_yo2ov_dt_b_product_details&th=1&language=en_GB I used a 0.2mm layer height with a 0.4mm nozzle. no support is needed. Included is the f3d file
Die Datei ist dafür da, dass der Sabrent USB Hub nicht herunterfällt.
A simple Sabrent 10 port USB hub PSU holder (for the 60W version) for sim racing rigs and aluminium profiles.
This allows you to mount the Sabrent 10 port USB hub directly to a sim rig with M8 bolts and T-nuts. I'm printing mine at 25% infill in ABS, Gyroid, with 4 walls, should be plenty strong enough.
After receiving my charger, I had to find a way to make a useful “charging station” corner. Ikea to the rescue, alongside the Skadis Universal Hook system! Hardware This design uses minimal hardware in order to securely mount it to a…
I sized this off the 10 port Acasis powered USB Hub. But the 10 port Sabrent appears to be identical. This footprint was created to make a bracket for this usb hub. The dimensions are pretty close, I cant guarantee perfect accuracy as I…
I had previously released a model to mount a passive 4 port USB hub to the side of an Alpha Evo wheel base, which made wiring multiple USB devices up a breeze… That is right up until you start drawing too much power from your USB port,…
This is a simple clip for attaching the USB-C to USB-C cable, and a generic USB 3.1 C-A adapter to a Sabrent M2 SSD enclosure (model EC-SNVE). The USB adapter used is a generic imported one with a 14mm x 6.66mm profile. Many of the…
these under desk mounts are a perfect fit for this product, https://www.amazon.co.uk/dp/B07RC8F2L3 with the switcher button mounted separately to the hub I can place the button close to me under my desk to switch inputs without having to…
A nice backplate that helps hold together a Sabrent USB/SATA adapter and a laptop (2.5") hard drive so it can be used as a portable/backup USB drive. Category: Computer
I modified the model files to fit this cheap Sabrent dock off amazon: https://www.amazon.com/Sabrent-Multi-Port-Delivery-microSD-HB-TC6C/dp/B08V4MMG8D All ports are available, screws should also be the proper spot if needed, mine fit…
Inspired by the Sabrent USB Hub Mount by stephancasas As I'm currently learning Fusion360, I decided to recreate the aforementioned USB Hub Mount. The primary objective was to allow for the use of M3 countersunk screws so I could mount a…
This is a very simple friction fit stand, to hold the hub upright on its side. I made it so my plugged in usb wireless dongles would be in an optimal position while I could still switch them on and off individually.
Wanted to mount my AX-8PTC on the side of my equipment stack, and Nicolas Massé's design was a great start! You can mirror the design in your slicer if you want to mount on the left side. Fusion .f3d design file included.
Nothing fancy here. I needed a mount for the Sabrent 2-Port USB Type-C KVM Switch behind my wife's desk. Works great and haven't had any issues. I did notice when mounting a went a little wide on the tolerances, so it's not a super snug…
Simple bracket to hold the Sabrent 10 port 60w USB charger. Supports are required. Printed at .2, 20% infill, and 3 perimeters.
After having my Pi's sat next to their respective Sabrent DS-4SSD enclosures https://amzn.to/3VGPf8m for too long, I've now created this housing which tidies up the location/cabling and look amazing! First prototypes were less high, but…
A bracket for holding the Sabrent 10-Port USB hub (HB-BU10) compatible with mounting on the Multiboard system. It was revised so that it occupies two fewer hexagonal spaces, and provides better viewing and access when mounted in the…
Introducing a solution to address the heat concerns associated with the SABRENT Rocket hard drive, this custom-designed 3D model provides a practical and effective way to optimize thermal management. Engineered with precision, this model…
Printed in PLA. No raft or brim. Personally printed in 30% with 3 walls, but could get by with lower %, keeping wall count. May require supports under 90º portion of tabs. Orientation was selected so print would fit on bed.
A simple no frills design that enables a Sabrentk USB 3.0 Hub to stand vertically. Suggested Use: Use the USB 3.0 Hub with a USB Extenstion cable, download and print the stand and place the hub / stand on your desk or wherever it's…
Normally when I'm doing USB hubs, I prefer the bigger powered kind, but for a wheel base, USB power isn't really important, and the bulk of average peripherals you might connect are low powered as well. Sabrent makes these neat little 4…
I have a USB direct attached storage (DAS) from Sabrent. It works great for 3.5" HDDs, however doesn't come with adapters for 2.5" drives. This is the model I'm referring to: "Sabrent USB 3.2 3.5" SATA Hard Drive Tray-less Docking…
you can reuse the case to hold 6 micro SD cards
Printed with 15% infill and tree supports for the tab overhangs, although they're small so supports may not be needed
This backplate allows for mounting the excellent Sabrent Voltik charger to a pegboard or to sandwich it between any flat surface. I've designed this to mount it to my IKEA SKADIS pegboard. The holes on the SKADIS board have a wider pitch…
Under-desk mount for the Sabrent 4-Port USB3.0 Hub (HB-UM43). Prints without supports and looks wonderful at 0.2mm .
A simple mount for the Sabrent 16 Port USB hub. Mainly for use to mount to sim racing extrusion, but also wall mountable with countersunk screws. Two end caps only, so care needed when lining up the mount. Created by BatteredBurrito
Mount your AX-8PTC power supply on a DIN rail. Uses 4 bolts and 4 square nuts to attach the MFG mounting plate (6-32 or M3). The sliding carriage might be stuck, so gently twist and wiggle to release after printing.
Sabrent usb hub holder for 4040 no screw Works for HB-BUP7 and HB-BUP10 4 walls/0.2mm standard pla/petg ok
The power supply that came with my Sabrent 10 Port USB Power Supply was a different size than the original model supplied. The original model has cables where one side is not centered. My power supply has both cables along the center axis…
A case for the sabernt ssd case that you can put magnetic tape on to magnetise to something else
This is a press fit under desk mount for Sabrent 5in1 USB C. It uses #4 wood screw. Mount hole is 3mm Here is the link to the device: https://www.amazon.com/dp/B0FHMJVHX7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 I just use short…
I have a USB direct attached storage (DAS) from Sabrent. It works great for 3.5" HDDs, however doesn't come with adapters for 2.5" drives. This is the model I'm referring to: "Sabrent USB 3.2 3.5" SATA Hard Drive Tray-less Docking…
Sabrent usb hub holder for 4040 no screw Works for HB-BUP7 and HB-BUP10 4 walls/0.2mm standard pla/petg ok
A nice backplate that helps hold together a Sabrent USB/SATA adapter and a laptop (2.5") hard drive so it can be used as a portable/backup USB drive. Category: Computer
Material: PETG Support: Tree (Auto) with model rotated on side (see image)
Screws may not sit entirely flush, which is why my USB hub is sitting tall in the holder.
Includes .f3d and .step files so you can modify if Sabrent shipped a different power supply for your hub--see photos for the specific power supply that came with my USB hub, and fits in this holder. Holes are sized for #6 screws. Also…
increased hole size for 8x3mm magnets for the lid and enclosure.
onshape-link brackets to mount this Sabrent 16port usb hub . prints without support
Replaces the original plastic lock thingy, please print it in a strong material. I used PolyCarbonate
The part is fixed to the desk using 2 screws (behind), the charger slides in and a tab with a stop secures it in place. The part can be printed in PLA with just a few supports.
This bracket mounts a USB-Switch ( Sabrent USB 2.0 ) to the stand of my monitor so that it can be easily reached. The bracket is attached to the stand (55 mm diameter) with the help of a 14 mm wide velcro strip.
The Sabrent USB 3 hub I purchased a while ago came with a flimsy vertical base but I wanted to mount it flat against the bottom of my desk. The hub in question is this one:…
I bought this hub a while back as a backup to my official Steam Deck dock. It's a great little dock that easily fits in my bag that I can use on the go. However, I recently started using it at my desk, and the Steam Deck dock sits under…
This mount is a snap fit for Sabrent HB-BU10 10 port USB hub. The mount can be screwed to the underside of a shelf and then the hub slides in and locks. Takes a bit of force to remove the hub from the mount. Fusion 360 design included in…
Remixed quickly so I could use a Sabrent Multi-Port Adapter, use it alongside my TPU, and it was cheaper in Canada so why not. Glue recommended, but not necessary. Instructions: Break the Sabrent open and then snip the part of the board…
Print without supports. Use M2.5 screws, self tapping.
Because everybody who is somebody has a bank of switches under their desk. Compatibility Please check carefully your switch model number. This is for a Sabrent HB-UMLS 4-gang USB switch, which dates from around 2020. If you have the newer…
A mount for a 10-port USB hub. Rember to print with supports enabled. Organic tree supports worked well for me.
This is a simple model that allows you to slot in a "Sabrent 2.5" SATA Hard Drive/SSD to USB 3.0 Adapter" along with a Raspberry Pi 4.
Material: PETG Support: Tree (Auto) with model rotated on side (see image)
