1 / 4
Sabrent Voltik 252W Pegboard Backplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Backplate for the Sabrent Voltik charger for pegboard mounting
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This backplate allows for mounting the excellent Sabrent Voltik charger to a pegboard or to sandwich it between any flat surface.
I've designed this to mount it to my IKEA SKADIS pegboard. The holes on the SKADIS board have a wider pitch then that of the included mounting bracket so you need to file a little bit of the pegboard to make it work.
It uses regular M4 nuts. The pockets were designed to be tight so you may need to pull them in with a screw. To mount it to the SKADIS, you'll also need four (4) M4x10 countersunk screws.