1 / 4
Sabrent Voltik 252W Pegboard Backplate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backplate for the Sabrent Voltik charger for pegboard mounting
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This backplate allows for mounting the excellent Sabrent Voltik charger to a pegboard or to sandwich it between any flat surface.
I've designed this to mount it to my IKEA SKADIS pegboard. The holes on the SKADIS board have a wider pitch then that of the included mounting bracket so you need to file a little bit of the pegboard to make it work.
It uses regular M4 nuts. The pockets were designed to be tight so you may need to pull them in with a screw. To mount it to the SKADIS, you'll also need four (4) M4x10 countersunk screws.