1 / 1
Air cooled 911 clock / boost gauge, magnetic phone mount — zdjęcie 1

Air cooled 911 clock / boost gauge, magnetic phone mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Phone mount that uses 17mm Dia ball. I used Wixgear Mount Base 17mm Diameter. and m4 x 20mm Hex cap screws, and m4 nut.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I used it as PETG, 60% infill as per the original maker.

Model was modified to fit a m4 hex cap screw and the m4 nut flush into the mount.

I used https://www.amazon.com/dp/B0DCVVSGW2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 (Screws / Nut)

https://www.amazon.com/dp/B0C3JD4LNC?ref=ppx_yo2ov_dt_b_fed_asin_title (Magnetic Phone mount) any 17 Diameter magnetic mount will work.

Original model was slightly bigger than the gauge so I wrapped electrical tape around once and it create a snug & sturdy fit. 

Tagi