Ultimate Tig Filler Storage Solution!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds five 50mm diameter storage tubes. Includes dividers/splitters to separate different filler thicknesses.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
EDIT 12/7/25: Uploaded V2.0 - consider it a final version. Removed material from the front face and added additional ribs on the underside of extra strength. Nice and rigid! I've also added a lower version with only ribs at each end to stop the tubes from swaying during movement if they're attached to a welding cart.
EDIT 17/7/25: Designed and uploaded filler dividers/splitters. Changed the name of the model to be a more comprehensive all-round storage solution.
Holds five 1m long tig filler tubes with a 50mm diameter (with a more generous amount of spacing between each) and has four 8.5mm recessed holes to fit 8mm countersunk bolts. Mount it to your wall, welding cart (like I have) or anywhere practical!
I had to split the model in half in my slicer, so I added dowel connectors and used some Ryobi 15mmx6mm(diameter) fluted dowels to join each side ***optional - you can just use the slicer generated dowels if you wish***
Due to strength being the main goal here, I wasn't too fussed about optimising filament usage and printed it at 10% with 4 perimeter walls. Feel free to play around with different infill percentages and walls! For orientation, I printed the mounting surface (one with the bolt holes) facing down. While this requires a lot of supports, it ensures that the M8 bolts won't split the print along the layer lines.
Enjoy! :)