Ultimate Tig Filler Storage Solution!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds five 50mm diameter storage tubes. Includes dividers/splitters to separate different filler thicknesses.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 288
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
EDIT 12/7/25: Uploaded V2.0 - consider it a final version. Removed material from the front face and added additional ribs on the underside of extra strength. Nice and rigid! I've also added a lower version with only ribs at each end to stop the tubes from swaying during movement if they're attached to a welding cart.
EDIT 17/7/25: Designed and uploaded filler dividers/splitters. Changed the name of the model to be a more comprehensive all-round storage solution.
Holds five 1m long tig filler tubes with a 50mm diameter (with a more generous amount of spacing between each) and has four 8.5mm recessed holes to fit 8mm countersunk bolts. Mount it to your wall, welding cart (like I have) or anywhere practical!
I had to split the model in half in my slicer, so I added dowel connectors and used some Ryobi 15mmx6mm(diameter) fluted dowels to join each side ***optional - you can just use the slicer generated dowels if you wish***
Due to strength being the main goal here, I wasn't too fussed about optimising filament usage and printed it at 10% with 4 perimeter walls. Feel free to play around with different infill percentages and walls! For orientation, I printed the mounting surface (one with the bolt holes) facing down. While this requires a lot of supports, it ensures that the M8 bolts won't split the print along the layer lines.
Enjoy! :)