Honeycomb Alpha Checklist Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Standard Digital File License
A 3D printed checklist holder for the Honeycomb Alpha Yoke. Previously sold on my website DaniSim.com . Instructions and sticker PDF included.
• The design is closely inspired by the Boeing 737 checklist holder
• Document clip for notes or charts
• The yellow knob has a working slider system like in the Boeing 737
• The angle of the checklist holder can be adjusted (or fixed in place if needed)
• Clamp system for easy installing without tools. Clamps on the back of the yoke.
• Also make sure to check out my throttle and reverser handles for the Honeycomb Bravo Throttle Quadrant
Parts list:
2x M4x14 Hex bolts
3x M4 Nuts (not nylon)
1x M4x35 Allen bolt
1x M4x20 Allen bolt
1x M4 Nut (nylon)
2x M3 Allen bolts cut to length
2x M3 Nuts (not nylon)
1x Stainless-Steel Compression spring -wire diameter 0.3mm -OD 3mm- spring length 5mm
1x Zinc Plated Straight Torsion Spring 0.7mm x 5.8 x 8mm
1x 3mm stainless-steel ball