Liczymy pasujące modele…
"A Simple 3D Printed Scotch Yoke Mechanism" is a model I designed for a mechanisms class. The motor used in this model is an N20 60RPM 6VDC gear motor powered by a 3VDC battery pack, thus the motor runs at approximately 30RPM. With the…
Replacement screw for Logitech/Saitek flight yokes and throttle quadrants. I printed mine in PLA and it's been working great ever since. The screw should just snap into the pad.
This is an OpenSource Yoke to be used with flight simulators! Due to a bug in Thingiverse's website (never emailed me back!), the first version exists only as a link and was not posted on my maker page or in searches. This is a re-upload…
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…
I have very little space where I fly my flight sim. The Honeycomb Alpha Yoke already took out a large chunk of my desk space, there is no place to put my keyboard which is a small Logitech K400+. An underdesk keyboard drawer is not…
These are the print files for the CadetYoke Open-source project. You can find wiring and BOM information here: ( https://create.arduino.cc/editor/vince_prints/5a0c7cba-663a-4108-b88f-435a6f6495b5/preview ) Video Demonstration: Print…
This is an alternative clamp for the Logitech Saitek G Yoke. It allows the yoke to be used on desks that may have an under frame that prevents using the clamp that comes with the yoke. Like the Ikea Kullaberg desk. You will need to print…
I just thought it would be nice to have a mounting system like this for the Logitech yoke to save me 1.2 seconds each time I used it. To my surprise it actually worked and it's strong enough to grip the table enough to be worthwhile. The…
A modular frame for Saitek yoke and panels for a fast installation on your PC after work: just us the yoke clamp on your desk. Three parts in 3 folders: The main frame The throttle frame (can be mirrored if you want it on the left) The…
Top Yoke Cap. Printed with PETG Support required
The Bose headsets are well liked by pilots, but the model produced in the early 2000s has weak plastic yokes that break. This is a printable replacement. My brother has used the headset with the printed yokes for over 4 years with no…
Because I didn't like the size of the existing yokes I made this one myself. Also as a bit of training in Fusion360. The center column is universal and does not contain any fitting for connecting an axis. So it is not ready to print…
I love to fly, and I use a flight simulator to stay in the air while I can't exactly be in the air. When I'm in the cockpit, I use Foreflight on my iPad, but it's harder to look down at my lap on a flight simulator. So, I made these…
Frustrated needing to replace your hearing protection because of a small part you cannot get? I was, no you don't need to be. These should work on any 3M over the ear style hearing protection that uses 2mm rods to mount the yokes on to. I…
I found the original spike-style cup attachment meant the ear cups frequently popped free of the headband when taking them on and off, so I combined the Satyr 3's screw-in attachment with the broader design of the Omega yokes. This is a…
I couldn't find a holder for the iPad Mini to fit the Honeycomb Alpha Yoke. So I created one. You will need to have a 40mm M5 bolt or similar. You could easily drill out the hole for a larger bolt. I'd recommend washers on each side so…
This is a shortened mounting screw for the Logitech/Saitek yoke so that it fits under my table without hitting the keyboard drawer. This is based on Zerink's design, with smaller screw head and a larger bulb on top so that the mounting…
A Stand for the Behringer x-Touch mini that can be mounted on Top of a Saitek or Honeycomb Yoke using their mounting screws for instrument panels. 2 pcs needed. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…
This is a redesigned Scotch Yoke mechanism. I had posted a non-printable sample design some time ago. Recently another Thingiverse user, Sprik, had generated a nice printable design. I made a couple and they worked very well, but the…
Update 2020-11-16: Created a better system for locking the arm clamps in place. I also added a wheel that would be considered a crappy blower fan. It has a lower profile and allows you to use an air compressor or canned air to spin the…
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
I needed a stand for my air rifle with an M6 thread, but I couldn’t find one anywhere, so I decided to make it myself. I used two M6 nuts stacked together to create the thread and model as the base design. It's a good idea to glue a soft…
I was looking for a new V-yoke for my shot rest crossbow, and did not find anything. I decided to create one. Finally i did two differents, one with longs arms, ans the second with shortest arms. I used ¼'' insert nut to fix it on my…
I couldn't find any Honeycomb Alpha Yoke Samsung Holders only iPad holders, so i based my designs off an existing iPad holder and re-designed the bracket to support Tab A models. I printed the bracket using PLA at 25% infill using normal…
This is one file, just mirror the object and print a second one. I found printing it on the side to be the most functional. I used 3 shells and 15% infill with PLA. came out perfect, plenty strong to hold the iPad in place. You can either…
This is the tool you need to remove the nut that attaches the cable to the post. You could buy one for $10 but why would you when you can spend a couple hours designing and printing one? The nut is 13mm, FYI.
Added tolerances, fixed some interference issues, fillets, sacrificial layers to eliminate a lot of support material needed, stuff like that. Should print better, cleaner, more accurately, and have better fitment off the printer w/o as…
Hello, Custom yokes for the Hifiman Edition XS if you want to mod you headband. Might require some extra tuning after print for the screw holes of headband connection. Uploaded are two versions. -Ver 1 is without extra material and might…
Requires nimble fingers for assembly
Don't throw away your flight yoke just because Turtle Beach won't send you replacement parts! This part replaces the primary shaft mount inside the main body of the flight yoke. My shaft could twist (it's not supposed to) and the problem…
Scotch Yoke Design from a die filer project I was working on Motor Bracket is sized for a 390 Motor, 28mm diameter 3x 4mm Threaded inserts used for the Yoke Support, and Bearing Bearing is sized for a 624zz (13mm Outer, 4mm Inner), Use…
Flat plug to push into a hole in the centre of the yoke. It's normally capped, but I bought my bike with this missing. The previous owner probably mounted a sat-nav here. It's an easy fit, not tight. You might want to allow some…
Tablet Mount for Honeycomb Alpha Yoke to screw in
This is a replacement yoke for the head of an O Cedar Floor Mop. My yoke which connects the handle to the head broke. This part is a snap in replacement. https://www.amazon.com/Cedar-Hardwood-Microfiber-Telescoping-Handle/dp/B06XWJV9PN…
Combined with Peter's clamps, these make the Logitech G PRO Flight Yoke System compatible with the Volair Sim Flight/Racing Sim Cockpit Chassis , without any hardware hanging so low under the table that you can use a standard keyboard on…
Here's another roller style for keeping your lampwork rotating smoothly and evenly in the flame. This is great if you're new to hollow work and/or want to have very even heat control for detailed work – it's really helped me create very…
You will need 4 m3 theaded inserts that are 5mm diameter. Also there are 2 black strips of rubber in the old yoke which you will need as well. Note that it is pretty hard to adjust the band. I'm working on that and will be releasing a V2.…
Dust cover/cap for INT/Yoke scuba tank valves. I printed mine using 95A TPU.
Based on the skysynergy's original model on Thingiverse, found here , this holder is a perfect companion for those with an Avidyne Bluetooth keyboard floating around the cockpit. This non-intrusive mount takes the hassle out of using they…
This is a super light spinner for an Aeronaut yoke 38mm. The 3mf file has specific settings merged from 3dlabprint.com that enables super light weight thin shell printing. Weighs less than 0.1oz I didn't have a fine enough scale to find…
Drew this up after seeing 507 Mechanical Movements #135 and thought it would be a great way to demonstrate what a reuleaux triangle is. You need to print 1 of everything except for the arm clamps which you need two of. This snaps/friction…
replacement seal for an oxygen tank yoke I suggest printing out of tpu with 100% infill
Fostex Style yokes and arms for the capra headband to support a variety of circular cup sizes. These will work for the Satyr 3 or the DMS Omega for example, and any other headphones that use circular cups. - Requires one M4 15mm…
A yoke for attaching the Stax Lambda series headphones to Capra Audio Headband v2 . By my estimation from pictures, it should also be fully compatible with the v3 version of the headband, but I have not tested this. This should be…
A multi-functional yoke for use while attached to a standard painters pole with a ¾ 5tpi ACME thread. I designed this for my Father who wanted extra stability for his rifle, when standing. I printed it in PETG with no supports, but with 4…
PA-22 Yoke insert to replace original Piper emblem.
I wanted to make a Yoke assembly for my Foredom motor, something like this one I had this big bearing from a previous project. This led me to create 2 versions: Big Bearing: Foredom Yoke Base Big Bearing.stl Foredom Yoke Big Bearing.stl…
Over the summer while visiting relatives in Massachusetts, I attempted to use my revopoint miraco to scan as much of the dinosaur footprints as possible in holyoke. The Revopoint Miraco uses projected infrared light to track it's position…
Stormcrow Prime, AKA Ryoken for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
This model contains two parts - one is the motor yoke to hold the motor, and the other is an insert (print in TPU) that provides some grip and shock transmission. My West Marine transom saver had fallen down and dragged the road - and the…
I wanted an easier way to bungee my backpack onto my bike rack. This yoke allows you to easily connect in ball bungees that are attached to the rack. It makes for a quick and secure way to strap down my backpack.
Follow Bikeyoke installation guide for your seat post model https://bikeyoke.com/travel-spacer-set-8mm-kolbenstange/revspac
I hate not having tightlock couplers on passenger equipment. Not just for looks, but a Kadee 118/119/120 coupler really works keeping passenger cars coupled together on crappy module trackwork. So these models are drop-in replacements of…
At my shop we replace many bonanza panels and get the yokes painted. When we are also installing an autopilot we always need to work the control surfaces, but without a yoke it can be difficult. I made this design to solve that problem.…
Ultimate Smart Interactive Cat Toy Replacement Yoke. These toys are great and cats love them, but the stock yoke on the toy breaks easily. This fixes the week spot
I needed a replacement plastic hub/yoke for my Hobby King Folding Propeller hub/yoke. SKU: OR025-02403A By printing this design and any variations thereof, the user assumes full responsibility of injury or death. This is a plastic mount…
this is a very basic model of a yoke rack. Print 2 of the yoke arms and 1 yoke bar. superglue the bar to the arms where you want. Category: Other
Flight Simulator For the flaps, add this behind the “faceplate - right - bottom - flaps” part https://www.printables.com/model/506564-cessna-172-flaps-panel More info about hardware and software on https://github.com/jpfranca-br/flightsim…
This system is designed for the Logitech G PRO Flight Yoke System. The brackets and face plates are 2 separate pieces that are press fit together using cut 1.75 filament. For various instructional videos I referenced Captain Bob's (no…
Hakko makes a mount for the FA-400 that costs more than the smoke absorber itself. I designed this mount to easily attach your FA-400 to any VESA pattern monitor mount that you can purchase from Amazon for around $30. I recommend using…
Suzuki GSX-R Steering "PLUG" (STEM YOKE TREE PLUG) (100% infill)
Class Echo stand for Saitek yoke Printed from PLA
Sennheiser Yoke Replacement
Supporto per controller Logitech Flight Simulator Yoke. Consente di posizionare una tastiera a basso profilo (5-6mm come Apple Keyboard) sul controller. Le asole per le viti consentono un buon gioco per fissare il supporto con le viti…
just a keyboard holder for the pro flight yoke system saitek. Places on top of the yoke system or can be placed anywhere also comes with screw holes 3.93mm across the thread screws
Use this yoke with a Howard Leight Honeywell VS130 VeriShield earmuff headband or equivalent. You can purchase the earmuff from Amazon , or only the headband as a spare, if it's available in your country. Bend the springy headband wires…
This clip is quite crude but effective way to keep the headphones's headband functioning properly. It helps with failure of separation of top and bottom part of headband where it connects to headphone cup. It seems the weakspot of many…
I printed in PETG with four walls
The yoke of a Senheiser HD 206 broke. I have modeled these replacement parts. I Printed the files two times to replace both sides. I used the screws from the old yoke to secure the plate that locks the headband to the bracket Printed…
This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the standard ZLT. Because the ZL does not have bearing holders, it is not required. The model is intended to print large side…
Support on the little tabs for the legs. VERY tight fit, might need to trim with scissors. Hose splitter is a loose fit. Add strips of tape to make it pressure fit.
This is adapter for Clamp Mounting to the Brunner Yoke CLS-E MK I
This is the left yoke, mirror on the x axis in the slicer for the right yoke. This model is a modification of the New 3.5mm left yoke to let the headphones lay flat for easier storage, particularly in backpacks/narrow bags. Not perfect…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
In the original Railcore II design the X axis travel is limited by part of the Z yoke blocking the heatsink fan on the low side of the X axis. On the high side of the X axis, is the part cooling fan that collides with the the Z yoke. This…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
Onshape model Parameters should allow you go generate the fit you need. The canoe I built this for had THICK gunwales so the #rocker parameter was set so I could get the bite I needed. Otherwise play with the length, thickness, width,…
I couldn't find the Throttle Lever for a lost CH Products Flight Yoke, just the Mixture and Prop Levers were available. I printed it in Polymaker ASA normal settings without supports.
Replacement part for Cooler Master MH751/MH752 headset. I only uploaded the right yoke with the wire groove. Just flip it if you need the left version.
I have two sets of Jabra C820s and some of the original plastic got really brittle. After using zip-ties and glue for some time, I finally decided to design yokes to replace the parts that were falling apart. The replacement yokes offer…
Parts required: https://bodekier-blueprint-labs.base44.app/builds/69ceb587f041cbedccd211aa
This is a replacement tilt bracket for small LED panels and ring lights that mount to standard tripods or light stands using a 1/4-20 camera screw. The part is designed to be printed in PLA. The lid does not require supports, but the main…
Other names for it and its variations include: Solomon's Seal African Ball Lover's Yok Wedding Vows Loop de Loop Two Lovers String Use ~60cm long and <5.5mm diameter cord for the large version and ~40cm long and <4mm diameter cord for the…
This is a mount that will take a 1/4-20 UNC bolt (Cut down) and mounts to the wire cable guide on a suzuki gsx-650f I had to cut the bolt down pretty short for mounting the TPMS module I wanted. These are the bolts I used:…
I have used a 0.2mm nozzle as it has a lot more detail haven't tested a 0.4mm nozzle though. You can print it in one piece by pausing the print and changing the colour from black to white or just print them separately and glue them…
Clean up your setup with this perfectly-fitted Guitar Wall Mount Hanger, Padded Yoke Cradle, Wall Display, Secure Hold Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
CUSTOMIZABLE educational desktop model: compare 10, 15 and 20 mm crank radius Scotch yokes with a hand-turned knob. For students and teachers to study how rotation becomes straight-line, sinusoidal motion. Stroke = 2 x crank radius: 20,…
There's 2 versions. "r-i" routs the cable a little bit through the housing where it meets the headband, while "r-o" routs it outside of it. A cable tie might be needed. Both are the LEFT side by default, simply mirror during preparation…
I created this as part of my Cessna 172S MIP sim build. I disassembled a Honeycomb Alpha light to fit behind the MIP and extended the control rod (12mm dia) with a replacement from Amazon that was longer but had to make some rod…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
I couldn't find the Throttle Lever for a lost CH Products Flight Yoke, just the Mixture and Prop Levers were available. I printed it in Polymaker ASA normal settings without supports.
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
Parts required: https://bodekier-blueprint-labs.base44.app/builds/69ceb587f041cbedccd211aa
I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…
This is a replacement tilt bracket for small LED panels and ring lights that mount to standard tripods or light stands using a 1/4-20 camera screw. The part is designed to be printed in PLA. The lid does not require supports, but the main…
This is a mount that will take a 1/4-20 UNC bolt (Cut down) and mounts to the wire cable guide on a suzuki gsx-650f I had to cut the bolt down pretty short for mounting the TPMS module I wanted. These are the bolts I used:…
This clip is quite crude but effective way to keep the headphones's headband functioning properly. It helps with failure of separation of top and bottom part of headband where it connects to headphone cup. It seems the weakspot of many…
![CadetYoke v2.0 [Open-Source Yoke for Flight Simulators]](https://media.printables.com/media/prints/68980/images/753650_9a34664b-1e5f-4f20-a71d-b6d279dcd5f2/large_display_20210520_19434253453453952_68980.jpg)
![CadetYoke [3D-printed Flight Simulator Yoke]](https://media.printables.com/media/prints/41552/images/412584_0078e221-ffed-4c21-9124-93d4c5dd3469/large_display_20200823_194155_41552.jpg)
