1 / 8
HobbyKing replacement yoke for 35mm 3mm shaft 8mm width — zdjęcie 1
1 / 8

HobbyKing replacement yoke for 35mm 3mm shaft 8mm width

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a replacement plastic hub/yoke for my Hobby King Folding Propeller hub/yoke. SKU: OR025-02403A By printing…

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a replacement plastic hub/yoke for my Hobby King Folding Propeller hub/yoke. SKU: OR025-02403A

By printing this design and any variations thereof, the user assumes full responsibility of injury or death. This is a plastic mount that can be under great stress if not safely printed and used.

Freecad file is given for user tweaks.

Print Settings

Notes:

Suggest 4-6+ perimeters and almost 100% infill. Orientation should be standing up not FLAT as one would commonly print a part like this. You will need supports in key places.

Category: Hobby

Tagi