Liczymy pasujące modele…
Replacement Propellerblade for Hobbyking Warbirds Motivation: Hobbyking has/had a lot of great RC PNF Warbirds, but sadly they and their replacement parts are out of stock. Because of that, my bird (P51 Mustang) and the ones of my friends…
Drop chute,cargo door suitable for a RC Bushmule from Hobbyking (Avios). The Bushmule has a cargo door built in as standard. I did not like this design and I have designed a new one This one fits exactly into the hole from the cargo door.…
Inspired by this: http://www.thingiverse.com/thing:604078 Did a complete redesign from this groundplate: https://grabcad.com/library/dji-f450-qoadrotor-top-roof-1 Did not tested it. If you print one, upload your make with images! Thanks!…
M4 X 50 avec écrou ou M4 X 45 sans écrou
Fichier Source : https://cults3d.com/fr/modèle-3d/jeu/hobby-king-paramotor-ersatzring-propellerschutz Modification : Découpe du 3D en ¼ de cercle
Clean up the look of your new HobbyKing Paramotor. Works for v2 Paramotor (green/yellow wing), may not fit v1 (blue wing). I printed mine with a very fine layer height of 0.08mm with 3 walls. You may have to enlarge or shirk the part by…
Ein Halter mit Schablone für ein Turnigy D56LV Servo für den Einsatz in einer Tragfläche. Das Servo kann damit leicht in eine Fläche zur Querruder oder Klappen Ansteuerung eingebaut werden. Siehe Fotos. Wer es ändern möchte, ein STEP File…
Paramotor HobbyKing Support FC & VTX
Paramotor HobbyKing Support Strap Lipo 24mm
Simple, but very usefull if you have lost one of the original canopy mounts (as me) ;-) Category: R/C Vehicles
I designed these to cover the main and nose landing gear bays of my Durafly D.H.100 Vampire from Hobbyking. The wheels on this plane are small, thus landing on grass might lead to bent struts/pins. I hand launch and belly land the…
Hobbyking ZD Racing Pirates2 TC-8 DIFF LOCKER use this in your rear diff for some serious Drifting Print instructions Infill: 100%
RX ELRS : ER5A V2 2.4GHz ELRS PWM Receiver TPU : 3 murs 20% gyro
this is my 1st attempt, for designing a wing for a Hobbyking Berserker, actually it's my 1st wing ever :) best print this with the sides of the wing as base, see simplify3D snapshot and glue the pieces together full wing is also provided…
This landing gear replacement is for the Hobbyking ME163 red version. Maybe it will fit for the original "green" version too. At the moment, it is a work in progress, meaning the upper part may be to thick for the ME163. My first version…
Front and Back Extended Skids for the Hobbyking Desert Fox You'll need some longer screws. Front Skid is al littlebit bend (5°) Enjoy!
I recently got a Basher Sabertooth on sale, but couldn't find any thngi's, so I made some ;) BSR SABERTOOTH SKIDS and BUMPER ( Hobbyking ) MID SKID V2 added, shape modified 60% infill, with supports Enjoy ;) Print instructions 60% infill,…
Motor mount for Hobbykings Piaget 2 Indoor Slowflyer. Gives the front some needed weight and additional stability. Use some glue and drill the holes for the motor if needed. Happy flying! Print instructions Quick and dirty ;) Holes have…
I recently got a Basher Sabertooth on sale, but couldn't find any thngi's, so I made some ;) BSR SABERTOOTH Wheelie Bar ( Hobbyking ) Wheelie Bar 60% infill, with supports Wheels 90% infill, no supports (you can choose a small or big…
Sadly I lost my cowling of my beloved mustang on an accidental flight into the woods. I realised, there are no replacement parts, after checking for it online. Luckely my friend has the exact same warbird, from which I took the cowling to…
Spare part(s) for a 10+ years old HobbyKing Turnigy RC Car. Maybe it's useful for someone.
Paramotor HobbyKing V1 V2 Jante
These are skids for the Hobbyking ZD Racing Pirates2 TC-8 1/8 scale touring car. the following cars are identical: DFModels Street Racer PRO Modster Tayphoon You'll need some longer screws. enjoy ;)
BSR BERSERKER MUDGUARDS (HOBBYKING) maybe it also fits for the HSP SEAROVER? Since there was no way to mount with screws without drilling, I used zip ties. Happy printing!
BSR SABERTOOTH Mudguards mount with one screw and two zip ties 10% infill Happy printing!
Front and/or Back Skid for the Hobbyking Desert Fox You'll need some longer screws. Enjoy! fusion file also added Print instructions Print Settings Supports: No Infill: 90%
I have been playing around with this x230 frame from HobbyKing and it has one major flaw, it has no legs. This will cause a problem, as the quad will routinely tip over and break the props. Maybe an experienced pilot will not have this…
I needed a replacement plastic hub/yoke for my Hobby King Folding Propeller hub/yoke. SKU: OR025-02403A By printing this design and any variations thereof, the user assumes full responsibility of injury or death. This is a plastic mount…
These are the Replacement parts for HobbyKing Berserker 1/8 RC Truggy that I frequently broke. The Fit wasn't perfect but worked.
This is a clone of the motor mount for the Go Discover flying wing, the only modifications done are thicker walls, this
Holder for the HobbyKing HK-GT2B Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 % Category: R/C Vehicles
This is a replacement for the front body mounts on the Berserker 1/8 truggy. I kept breaking them quicker than I could get replacements. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: .2…
I started with rcKeith's spinner (thanks!), then stretched and modified it so it would work with a Windsor 12 x 6 x 3 three-bladed prop. I've flown this and it works well. This is designed to work with the original FW-190 motor…
FPV plate for interna installation within the 2.3 meter Hobbyking or CMpro J3 Cub Category: 3D Printing
Replacement wing joiner for the Hobbyking ASW 28 Category: 3D Printing
This is a compilation of parts used to outfit the Hobbyking Avios Bushmule V2 with to be FPV ready. The parts are tailored for an analog build. The VTX mount and mast is tailored for the HGLRC 2.5W VTX found on Amazon and matches the…
HobbyKing Durafly Hyperbipe firewall Print Settings Printer: Tronxy D01 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Esun PLA + yellow Category: R/C Vehicles
My purpose for designing this was to protect the MultiWii board on crashes, shield the barometer from prop wash, and to add to the overall weight of the board so that it is less effected by vibrations. I made holes for all of the headers…
I started with rcKeith's spinner (thanks!), then stretched and modified it so it would work with a Windsor 12 x 6 x 3 three-bladed prop. I've flown this and it works well. This is designed to work with the original FW-190 motor…
This is a replacement for the front body mounts on the Berserker 1/8 truggy. I kept breaking them quicker than I could get replacements. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: .2…
Since I did not like the suspension and mounting (is quite a fumble) On the picture you can see the front of the new, in the back the original suspension. Just remove the chrome pins from the wood and put the new holder over it and screw…
