Hobbyking ME 163 Landing Gear Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This landing gear replacement is for the Hobbyking ME163 red version. Maybe it will fit for the original "green"…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This landing gear replacement is for the Hobbyking ME163 red version. Maybe it will fit for the original "green" version too.
At the moment, it is a work in progress, meaning the upper part may be to thick for the ME163. My first version was too thick and I already adjusted it a little bit, I will soon reprint this and adjust it further. The lower part fits very well so far, as long your metal piece isn't bend too much ;-)
You can glue the magnet with CA glue for example.
I've printed it using ABS, but I suggest another material, if you don't want a warping effect.
Let me know, if it fits in your ME163 and save the 11 bucks or so for the useless HK landing gear ;-)
Category: R/C Vehicles