Replacement Cowling P51 Mustang Hobbyking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reversed engineered cowling for Hobbyking P51, since there are no replacment parts availible
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Sadly I lost my cowling of my beloved mustang on an accidental flight into the woods. I realised, there are no replacement parts, after checking for it online.
Luckely my friend has the exact same warbird, from which I took the cowling to 3d-model my own. First step was a scan with my phone camera, which gave me a stl-file. Afterwards I imported it into CAD. Lastly I could reconstruct the surfaces.
The part should be printed in upright position with standard PLA Settings. For fixing the Cowling on the plane, you can use 1mm thick magnets (If you have thicker magnets, you could adapt the step file for your needs).