Liczymy pasujące modele…
This is a 3D printed model of the P-51D Mustang from WWII. It features the fin offset and the wing washout of the original P-51. The entire model can be printed without the use of supports. I printed the entire model in PLA. This model…
Wallart or decoration of the legendary P51 Mustang. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files).
Large version of my P51 Mustang Wallart, fits together with superglue. I used poster gum for mouting on the wall. Very simple print. Can be scaled, files alerady max out MK3s print bed.
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/p51-d-mustang/
This is the cockpit I built for a CARF Models P51 Mustang including the seat, left and right panels and the rear radio stack. It was built using a combination of FDM and RESIN 3D printed parts. The Exhaust stack and instrument panel will…
A set of left and right exhaust stacks for the CARF Models P51 Mustang. The shown examples were FDM 3D printed and textured by stippling acrylic paste with a stiff brush, painted and treated with a technical paint by Citadel called Typhus…
This drop tank can be printed in three parts which are split at a scale seam line. It is 250mm long which is anout 1/8th scale (20cc sized model). It is attached and secured using 10x2mm magnets with two 1/8th aluminium guide rods. this…
I needed some space on my desktop, so I took advantage of ThinkPad's ability to be opened "completely". Moreover, the screen is now at a more comfortable height for my neck. As this laptop is quite heavy, I didn't want it to fall upfront,…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
I made a P51 as a suspended print, just for fun. The model is made to print with 0,2mm layer hight. Other layer hight may not work. Printed on Prusa Core one, 0,2mm layer hight, PLA, without support and without raft. The printbed has to…
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Battery Terminal Cover / Protector for Canon BP511 camera battery Battery slides in and locks in place for safe storage. Protecting the battery exposed terminals for safety. Printed in PLA at 0.2mm and without supports on a Prusa Mini+.…
P51 Mustang Wallart made from KI generated graphic. The model consists of three parts which require a 400x400mm build plate like an Anycubic Chiron. By scaling it down to around 60-65% it can be printed on most ~200x200mm printers.
Printed with a .4mm nozzle and at .2mm layer height. No infill.
Here's a quick design I made today. I recently got an old Canon EOS 300D and wanted to put it to some use. However I did not have a battery for it or a battery charger. One of the challenges I had with this is that no one else appears to…
Spare gears for kitchen robot Moulinex Masterchef FP517
After having to print a new base plate for my doorbell because the original broke. I decided to try my hand at creating a magnetic base as I was attaching it to my metal screen door. In the photos you will find my print, the magnet should…
This is a simple headphone hook designed to attach to one of the two headphone jacks on a Yamaha P515 digital piano. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 10%…
Sadly I lost my cowling of my beloved mustang on an accidental flight into the woods. I realised, there are no replacement parts, after checking for it online. Luckely my friend has the exact same warbird, from which I took the cowling to…
I was tired of looking where I left it, so I decided to create a holder and attach it to the wall. I use Fusion 360 and I import a photo and design a holder around it. I think it works nicely. I printed it upward without any support with…
Quick and easy adapter solution. Since the mount is quite small, use a tough filament for printing (ABS, PC, or similar). Also, make sure your printer is properly calibrated for accurate scaling. If the filter doesn’t screw in smoothly,…
Magene P505/P515 lockring to Shimano Hollowtech II 16 notch adapter. I uploaded two different sizes to accommodate wrenches with slightly different major diameters (45-46 mm outside of notches). The minor diameter (inside of notches) and…
I designed this mount so I can have my Windows 11 fingerprint scanner attached to the underside of my desk. The previous scanner I had was smaller and hot gluing it to the underside of my desk worked fine. This new scanner, which works…
For MTD P51 lawnmower or other types of lawnmowers or other garden machines equipped with MTD engines, made based on the
this model is made for install the 2814 with changed screwholes (19mm-25mm) instead of (16mm-19mm), it is modified in order to fit the longer 2814 and has a cavity to fit the longer shaft of the sunnysky 2814 suggested by the eclipson…
Tool to check the Trimtap if it is in limits
Printed mine in bulk PETG and draft mode, no need for fancy layers or support. It is possible to mount the drives with M3 screws, but I dont thinkt that is needed. Uploaded a few variants if you dont want to use openscad to change the…
Mr Fox was recently gifted an old bakelite telephone with a broken rotary dial and modelled a replacement part.
This is a wall mount I designed for the RC Volantex 500mm P51D. It's printed in 2 pieces and connected together by a single M3 screw. The large tab under the tail wheel support is meant to fit a 5lb command strip. Printed with PLA.
Slightly reworked for a Tower Hobbies Mk1 P51 Mustang.
Replace the worn-out feet on your Lenovo P50 or P51 laptop with some nice TPU replacements! The original feet has two materials: a soft exterior (that touches a surface), and a harder rubber that has some nubs that lock the foot in-place.…
The diameter of the rods is 5.7 mm and the distance (center to center) between them is 49.3 mm. I recommend printing it from ASA as it is uv resistant. Die Stangen des Zauns haben einen Durchmesser von 5,7 mm. Der Abstand (Mitte zu Mitte)…
Upgrade your Eclipson P-51 Mustang RC Plane with this integrated FPV battery cover mount , designed specifically for Walksnail systems. This is not just a mount — it directly replaces the original battery cover, giving you a clean,…
A cowling for the Mk1 Version of the Tower Hobbies P51 Mustang. (Yes, she's a little beat up ;-)
A motor mount for the Tower Hobbies MK1 P51 Mustang. (This is for the older/original version of the Tower Hobbies P51 Mustang, not any of the most recent versions). Depending on your print settings, you'll be between 28 and 40 grams…
I've been having fun with this little 3 channel RC P51 from DEERC. Flying with the nephews, I wanted better slow flight characteristics and less wing drop tendency. These fixed 15 degree flaps did exactly what I wanted. My printer has a…
Držák senzoru BAUMER FHDK 10P5101
This is a portable stand to hold an air water/oil separator. Specifically designed to hold my model mp516803av regulator while air brushing. Having used supports for the 35mm opening filing was necessary to provide clearance for my…
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
This is a portable stand to hold an air water/oil separator. Specifically designed to hold my model mp516803av regulator while air brushing. Having used supports for the 35mm opening filing was necessary to provide clearance for my…
For MTD P51 lawnmower or other types of lawnmowers or other garden machines equipped with MTD engines, made based on the
Quick and easy adapter solution. Since the mount is quite small, use a tough filament for printing (ABS, PC, or similar). Also, make sure your printer is properly calibrated for accurate scaling. If the filter doesn’t screw in smoothly,…
A motor mount for the Tower Hobbies MK1 P51 Mustang. (This is for the older/original version of the Tower Hobbies P51 Mustang, not any of the most recent versions). Depending on your print settings, you'll be between 28 and 40 grams…
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
