Lenovo P50 and P51 replacement feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace your worn out feet on your Lenovo P50 or P51
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Replace the worn-out feet on your Lenovo P50 or P51 laptop with some nice TPU replacements!
The original feet has two materials: a soft exterior (that touches a surface), and a harder rubber that has some nubs that lock the foot in-place. Remove the entire foot so that a bare, flat surface is seen on your laptop, and clean it up with a little isopropyl alcohol.
Then, print the feet so that the smallest surface is facing the bed (the part you'll see when attached to the laptop). Then, put a piece of double-sided tape (like this) on the largest surface, cut to fit, remove the tape cover, and press it into your P50 or P51's foot hole.
Keep in mind that there are different front and back feet! Make sure to print two of each and attach them where they should be.