Lenovo P50 and P51 replacement feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace your worn out feet on your Lenovo P50 or P51
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Replace the worn-out feet on your Lenovo P50 or P51 laptop with some nice TPU replacements!
The original feet has two materials: a soft exterior (that touches a surface), and a harder rubber that has some nubs that lock the foot in-place. Remove the entire foot so that a bare, flat surface is seen on your laptop, and clean it up with a little isopropyl alcohol.
Then, print the feet so that the smallest surface is facing the bed (the part you'll see when attached to the laptop). Then, put a piece of double-sided tape (like this) on the largest surface, cut to fit, remove the tape cover, and press it into your P50 or P51's foot hole.
Keep in mind that there are different front and back feet! Make sure to print two of each and attach them where they should be.