Counting matching models…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
Drywall/ceiling mount for Aruba AP500 series WiFi Access Points Aruba's AP500 series do not come with any mounting hardware, this simple mount allows you to screw-mount this style of AP to a wall or ceiling or other solid surface. This…
Magazinerweiterung bzw. Speedloader für HDP50 mit Picatinny Schiene.
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
This is a work in progress, i might need some help with the collector rings for the chopper motor.
Look ma, no overhangs! I love the original model, but it was missing a few design elements which make printing a lot easier - so here's my take! All STL files require no supports, and are pre-orientateded. Highly recommend turning on…
need any 18mm screw x 3 i use socket head
Peel P50, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
Brackets were found to be out of stock most places I looked an I couldn't get them in time for a project. This has been tested and is recommended to be printed in PETG for the slight flexability it gives the the notches. Some clean up to…
This is a printable, customizable insert for the PSU cutout on Phanteks cases. I made this file because my SuperFlower PSU has a data sheet on the side facing out when installed fan-down, which isn't very good looking. I modeled this case…
Washers for Simagic P500 with P-ORP(H) springs.
The mount holds the laptop base at a 25 degree or 12.5 degree angle, allowing you to angle the LCD vertically adding quite a bit of height and Improves laptop cooling. It's great when you have other elevated monitors and want to bring the…
Originally published here: Motorola One Vision / P50 xt1970 case by tato_713 - Thingiverse This is the case for the Motorola One Vision ; for the regular Motorola One visit this . Some of the models are designed for rigid materials and…
Distanzstück um die Pressluftkartusche vor dem rumwabbeln zu schützen wenn die nicht verbunden ist Spacer to protect the compressed air cartridge from wobbling when it is not connected
This is a remix of Mark's Lenovo Laptop Mount, found here: https://www.prusaprinters.org/prints/21663-lenovo-laptop-mount . I adjusted the width of the gap that the laptop slides into on the mount pieces. I found that my laptop, a Lenovo…
Un support Rail pour le Steyr LP 50 compact ect....
Peel P50 Silhouette Wallart. Please scale before printing!
Úprava LP50 pro plinking :-) Attachment for LP50
Pedal mount designed for the Simagic P500 and Playseat challenge . Although this was designed for the P500, it is generic enough that it can fit most pedals with at least two mounting holes. For the P500 you should probably print 4 sets.…
The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…
This is a holder for a ThermoPro TP50 thermometer than can be glued at my “Non-damaging 3 pin base plate” for usage in an Ikea Platsa. I recommend to use UHU Plast special glue for this. I have attached the original FreeCAD (I am using…
Just an easy to print model with snap fits for the usb and psu module.
This amp comes without a case except of top and bottom plates. So if you are going to leave it on the table, anything can touch the electronics from the sides. I tried to insert it into a speaker case, but this way I lose access to amp…
Remix of 1D_Design's "Bottom Bracket Tool 44mm 16T for (Bafang, G510, Ultra)" so it fits the Magene lock ring adapter
just a simple wall mountable stand for the umarex hdp50 pistol
this is a mockup of the Power Power Supply Modul DP50V5, DP30V5A, DP20V2A for further 3D constructions. it was not designed to be printed!
This LG screen has a very thin frame, and so the webcam covers the top of the screen. This model matches the curvature of the back of the monitor, and the size of the webcam mount. No disassembling of the webcam is required, it can just…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
This model simply makes the OG body printable in place, and adds ventilation holes. Click HERE to download the new model, which features a completely re-designed leg system, adds features and fixes issues + is now is completely print in…
I designed this little power supply case for my DSP5005 in style of a mini laboratory power supply. It works really nice with an old notebook power supply. If you need more space you can print the extension too. Both, the body and the…
Simple but effective fan duct. It can be mounted to a 140mm fan in the front of the case. Print settings: 2 walls 10% infill no supports ---------------------------------------------------- Einfacher, aber effektiver Luftkanal. Er kann…
This is a remix of Ryan Kelly's design. I made it taller and added clips to make releasing the saw easier.
Voici un upgrade indispensable pour votre lanceur Umarex T4E équipé du système de percussion rapide ( Quick Piercing ). J'ai conçu ce bouton texturé pour coiffer le bouton d'origine. Il offre une surface d'appui nettement plus large et un…
Custom covers for the rear ITX motherboard plate. -Included a blank plate so that you can design your own. 1/3/2021- Fixed Seasonic plate Print Settings Printer: Ender 3-v2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
Mount your air cylinder with this spacer so it doesn't rattle around.
A simple support that helps to hold up large PCBs when using a hot plate. It's the same height as the MINIWARE MHP50 Mini Hot Plate , so you don't have to find random objects to hold up your PCB. You can print the large version for more…
A side mount for a 20qt Hefty Protect filament drybox to hold the ThermoPro TP50 humidity monitor. Print instructions I only needed supports for the two hooks when printing this on its back, but your mileage may vary.
Modified cover to fit 92mm fan
Simple bracket with an internal swept groove to route cable tie through. The groove is sized to support a ¼" wide cable tie. Print with the mounting feet of the base on the bed of the printer.
A little holder I made to loosely hold onto a thermopro tp50 for my drybox. I made it such that there was space to use command velcro strips to make it detachable from the lid of my container, as the walls are not transparent. Best…
This case is printed in two parts and screws together using M3 8mm screws to hold an INUI P50 power bank. It includes male and female Garmin mounts which can be rotated and snapped into place to change the angle the battery is seated. I…
02/16/24 UPDATE: V5 - Essentially the same design, with air slots in the rear. Better ventilation for humidity readings. A few details refined. This part is designed to sit in an air-tight box with your filament and a bit of desiccant to…
Magene P505/P515 lockring to Shimano Hollowtech II 16 notch adapter. I uploaded two different sizes to accommodate wrenches with slightly different major diameters (45-46 mm outside of notches). The minor diameter (inside of notches) and…
Dieser Adapter ermöglicht den Anschluss eines standardmäßigen 120-mm-Abluftschlauchs an das Klimagerät Medion P502. Durch den erweiterten Durchmesser wird der Rückstau der warmen Luft verringert, was die Effizienz der Anlage steigert und…
Front and rear stands for P500A Desktop Case. Raise off floor/carpet to allow more air to PSU etc. 30% at least infil 0.3mm res
The smaller part replaces the internal battery and maintains the original internal circuit by pressing the contacts on the Camera. The original wires internal to the original battery pack are stripped and replaced with longer wires that…
Update as of 19.6.2018!! This is a universal mount to attach the WLANThermo Family of BBQ-Thermometers to the leg of a Weber 57cm BBQ-Kettle or the handle of a 1.25" Gas-Grill like eg. Napoleon Prestige 500. Configure both parts according…
A compact adapter for mounting a Mantis X training system to the compressed-air cylinder of the Walther LP500. It provides a stable mounting position for dry-fire practice and shooting analysis without modifying the pistol.
Per a request on Reddit's r/3DModeling sub, I created this to be a 1:1 replacement for the lid roller on the above model thermal printer.
For cooling, I recommend a 24v 30mm fan wired directly into the back of the ZY12PD. I used a yrd3010 because it came off of my nightmare Monoprice delta pro and i wanted to use it on something (and it has a super low stall voltage too! it…
Better than no slot bracket, this one does a reasonable job of filling the empty space, in my old 486 machine.
Add a short 3mm bolt to stop it from sliding back and forth.
Replace the worn-out feet on your Lenovo P50 or P51 laptop with some nice TPU replacements! The original feet has two materials: a soft exterior (that touches a surface), and a harder rubber that has some nubs that lock the foot in-place.…
The outer cut-out of the cap is meant to let the light of the volume-indicator stay visible. The central cutout is required for the remote's IR-receiver to stay uncovered. The print can be done with minimal support (see sliced…
After a quick search, I couldn't find anything that fit this power supply so I made my own. This is a quick and easy mounting bracket that attaches to some DIN Mounts I printed from this model since I'm using a Manta M5P in my build. They…
Box for Miniware MHP50 hotplate Needs 3x M3x20 mm screws Also included STEP+F3D files for further modifications
Simple mount for the YS-AP50L bluetooth amp and 4 wago 221's I used it as a cheaper alternative to the nobsound. The orginal standoff were used as inserts to mount it.
Designed to fit an MHP50 , a USB C PD supply , and the supplied USB C cord and booklet from the MHP50 inside a Toyo Steel Pencil Case . I printed this in PLA in a color to match the Toyo case. Can be printed in any material and at any…
I made this compact stand to hold two INIU P50 10,000mAh 45W power banks upright for storage and charging. Their rounded bottoms make them awkward to stand on their own, so the pockets support them while keeping the USB ports and battery…
Trava para gaveta impressora MP501 Ricoh, peça alternativa.
Its just a simple holder for the Remote of (Heidenfeld HP500) and a few other heating panels that use the same remote.
This is a simple desk stand and battery holder for my HUZZAH Feather ESP8266 + Adafruit NeoPixel FeatherWing 4x8 (NeoMatrix) scrolling text sign. It includes a holder sized for a PKCELL LP503035 LiPo battery (3.4V, 500mAh) so the sign can…
Simple grill cover to hide the basement hole above the hard drives of my pc case, but to also allow air circulation. Made 2 little stands to add 6x3mm magnets then glued them to the grill for a seamless fit. I used 20% infill with white…
Hello everyone! I designed and built this model completely from scratch using Tinkercad, shape by shape, out of pure passion for unique and bizarre microcars. This is my replica of the legendary Italian 3-wheeler – the Casalini Sulky SP50…
Intended to replace a missing corner on the workstation's faceplate. I made a mistake during modeling - it should've been attached from the inside to the outside, not the other way around... Because of that, dorung the front attachment it…
I bought a nice 27" 5K monitor, the Alhua Dahua LM27-P501, for a good price given its specs. Unfortunately, it doesn't come with VESA mount support. So I designed a VESA 100x100 and 70x70 mount for this monitor. It's easy to print and…
Sua Bomba Periferica BP500 quebrou as tampas? Pois aqui estão as novas trampas de proteção com modelinhos diferentes e arrojados ;D RECOMENDAÇÃO: Imprima com ABS ou PETG En (google translate): Did your BP500 peripheral pump's covers…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
Just an easy to print model with snap fits for the usb and psu module.
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
This is a work in progress, i might need some help with the collector rings for the chopper motor.
This is a simple desk stand and battery holder for my HUZZAH Feather ESP8266 + Adafruit NeoPixel FeatherWing 4x8 (NeoMatrix) scrolling text sign. It includes a holder sized for a PKCELL LP503035 LiPo battery (3.4V, 500mAh) so the sign can…
Thy is my original first design of the Compensator for Umarex TP 50 Gen 2 (HDP 50). You need to have tunning barell installed, you insert it over the thread. Compensator itself is locked in place with 2x M3x6 grub screws. I printed the…
The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…
Resin print reccomended - very fine details. Modeled in Tinkercad, which is rather janky, so manage your expectations. Banana for scale.
While the Magene P505 power meter crankset comes with an adapter for installing the lockring with a typical bottom bracket tool, I do not own that tool, I have the style that look like typical ratchet sockets and those won't work with the…
Another thrift store find. A $7.50 circular saw with a bad blade. Best deal for a new saw blade was $5.50 at Amazon but had a 5/8" hole. A made a bushing that is actually a little wider than the blade. There is a recess on both plates…
This is made to fit any Samsung motor I tried to make it to look like a P50 Rotor and Stator but I tried my best.
Thy is my original first design of the Compensator for Umarex TP 50 Gen 2 (HDP 50). You need to have tunning barell installed, you insert it over the thread. Compensator itself is locked in place with 2x M3x6 grub screws. I printed the…
PP5000 Flashlight button Cover There are two files and I can't remember the difference between them
UK Faceplate Adapter for the Paxton KP50 (And K50/P50/TouchLock 50 range) readers (Net2/Switch2). You will need 3x M3x4x5 brass heat inserts and 3xM10x8 screws - I used Allen Cap, but you can use whatever you wish, plus some washers if…
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
This is my take of a DP50V5A lab bench power supply. The DP50V5A power supply controller: https://www.aliexpress.com/item/33013863500.html The switching power supply: https://www.aliexpress.com/item/33031342659.html The main reason for…
Speed feed to replace the lid on an APP 50 paintball loader. 2/12/2021 - added a notch for the existing hinge on the loader so that you don't have to trim it off to avoid interference with the fit. Print Settings Printer Brand: Prusa…
Simple protection covers for the MX-P50M ham radio amplifier to protect the switch and other external parts from being damaged or from damaging other gear when being carried in a backpack. Category: Other
Print it standing, fill is not mandatorz, but check how the slicer makes it because it it too little it fills only 1 of the pillars. So check the fill in the middle of the model once sliced. If it is sill loose, you can put a piece of…
