1 / 5
Simagic p500 P1000 Enlarged Brake Pedal — image 1
1 / 5

Simagic p500 P1000 Enlarged Brake Pedal

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Enlarged brake pedal for my Simagic P500 load cell brake to go along with the longer throttle pedal

Rating
0 / 5
Likes
11
Downloads
146
Makes
0
Views
1,084
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. 

 

I have the Simagic P500 pedals, and the mounting hole pattern just happens to be exactly the same as the P1000 so this throttle pedal face fit perfectly but it needed a companion because it no longer matched the stock pedal faces. So I just whipped this design up real quick in OnShape and matched the general aesthetic of the throttle pedal face. 

 

I used Overture Starry Blue PETG and some brand-less “silky silver” PETG from Amazon for the accents. They came out looking really nice and very nearly resemble powder coated metal. The most noticeable improvement, as someone who sim races in socks, is that these are no longer cold to the touch when you first start playing! I also appreciate the wider surface area for my foot on the brake pedal. 

 

I made the 4 main faces Starry blue and then the chamfers and inside the holes are silky silver. Printed on a P1P with an AMS. 

 

Printed with 6 walls for added strength and 15% gyroid infill. 

I used Arachne to generate the walls and set 1 wall for top and bottom layers to help create the illusion that they are powder coated metal.

Make sure to print with the front facing down on a textured print bed for best results. 

Tags