1 / 6
ChengLiang P500W24V DIN Rail Mount — image 1
1 / 6

ChengLiang P500W24V DIN Rail Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A quick PSU mount I made for my Mercury One.1 build with a custom electronics bay.

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
36
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

After a quick search, I couldn't find anything that fit this power supply so I made my own.
This is a quick and easy mounting bracket that attaches to some DIN Mounts I printed from this model since I'm using a Manta M5P in my build.
They are a little tight when attached to the rail, but it works!

Assembly:
4 - M4x12 Screws for power supply
6 - M3x6 or M3x8 Screws for din brackets (The mount itself is 4mm thick, and the heatset inserts I used for the brackets were 6mm, so I had room for the longer screws)
Attach the DIN brackets first, then attach to the power supply.
3 brackets is overkill, and 2 will do just fine.

Hope it fits for you; Enjoy!

Tags