ChengLiang P500W24V DIN Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick PSU mount I made for my Mercury One.1 build with a custom electronics bay.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
After a quick search, I couldn't find anything that fit this power supply so I made my own.
This is a quick and easy mounting bracket that attaches to some DIN Mounts I printed from this model since I'm using a Manta M5P in my build.
They are a little tight when attached to the rail, but it works!
Assembly:
4 - M4x12 Screws for power supply
6 - M3x6 or M3x8 Screws for din brackets (The mount itself is 4mm thick, and the heatset inserts I used for the brackets were 6mm, so I had room for the longer screws)
Attach the DIN brackets first, then attach to the power supply.
3 brackets is overkill, and 2 will do just fine.
Hope it fits for you; Enjoy!